Effect of parameters on roll dynamic response of an articulated vehicle carrying liquids

Directional response and roll stability characteristics of a partly filled tractor semi-trailer vehicle, with cylindrical tank, under different parameters and conditions are investigated. The effective parameters and conditions in the stability of a tractor semi-trailer carrying liquid can be considered as filled volume, kinematic viscosity of liquid cargo and vehicle steering input. The dynamic interaction of liquid cargo with the tractor semi-trailer vehicle is evaluated by integrating a dynamic slosh model of the partly filled tank with five-degrees-offreedom of a tractor semi-trailer tank model. The dynamic fluid slosh within the tank is modeled using three-dimensional Navier-Stokes equations, coupled with the volume-of-fluid equations and analyzed using FLUENT software. The coupled tank-vehicle model is subsequently analyzed to determine the roll stability characteristics for different conditions and maneuvers. The results show effects of parameter variations on roll stability of the vehicle carrying liquid and also fluid’s behavior in interaction with a vehicle’s dynamics.     

Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.     

Geometrical and structural setting of landslide dams of the Central Alborz: a link between earthquakes and landslide damming

Bulletin of Engineering Geology and the Environment - The combination of remote sensing observations, geological field investigations and geomorphological mapping and measurements along with faults...     

Removal of Diazinon from aqueous solution by electrocoagulation process using aluminum electrodes

Electrocoagulation (EC) is an electrochemical method to treat polluted wastewaters and aqueous solutions. In this paper, the removal of Diazinon was studied by EC on aluminum electrode. The effect of several parameters such as initial concentration of Diazinon, current density, solution conductivity, effect of pH, and electrolysis time were investigated on EC performance. The obtained results showed that the removal efficiency of EC depends on the current density, initial concentration of Diazinon and electrolysis time. The optimum pH is 3 and also the solution conductivity has no significant effect on removal efficiency.     

Asphaltene precipitation and deposition in oil reservoirs – Technical aspects,experimental and hybrid neural network predictive tools

Precipitation of asphaltene is considered as an undesired process during oil production via natural depletion and gas injection as it blocks the pore space and reduces the oil flow rate. In addition, it lessens the efficiency of the gas injection into oil reservoirs. This paper presents static and dynamic experiments conducted to investigate the effects of temperature, pressure, pressure drop, dilution ratio, and mixture compositions on asphaltene precipitation and deposition. Important technical aspects of asphaltene precipitation such as equation of state, analysis tools, and predictive methods are also discussed. Different methodologies to analyze asphaltene precipitation are reviewed, as well. Artificial neural networks (ANNs) joined with imperialist competitive algorithm (ICA) and particle swarm optimization (PSO) are employed to approximate asphaltene precipitation and deposition with and without CO₂ injection. The connectionist model is built based on experimental data covering wide ranges of process and thermodynamic conditions. A good match was obtained between the real data and the model predictions. Temperature and pressure drop have the highest influence on asphaltene deposition during dynamic tests. ICA-ANN attains more reliable outputs compared with PSO-ANN, the conventional ANN, and scaling models. In addition, high pressure microscopy (HPM) technique leads to more accurate results compared with quantitative methods when studying asphaltene precipitation.     

High output impedance current-mode lowpass,bandpass and highpass filters using current controlled conveyors

Three new current-mode second-order filter configurations which employ one or two current controlled conveyors (CCCIIs) and three passive elements are presented. Each proposed filter can realize one of the bandpass, lowpass or highpass responses all at high impedance outputs. The proposed filters offer current-control of pole angular frequency ω_o without disturbing the parameter ω_o /Q. No component matching is required and all the passive and active sensitivities are low. PSPICE simulation results are given to confirm the theoretical analysis.     

The effects of post annealing on the mechanical properties, microstructure and texture evolutions of pure copper deformed by twist extrusion process

X-ray diffraction peak broadening analysis showed that performing a proper heat treatment between the twist extrusion passes of commercially pure copper decreased the coherent domain size and increased the microstrain. Moreover, SEM micrographs illustrated that annealed material contained new formed grains that could not grow due to lack of sufficient time. Under such circumstances, the ultimate strength was elevated about 45 MPa. The deformed material showed texture of simple shear deformation, changing by applying the post annealing.     

Prediction of bulk modulus and volumetric expansion coefficient of water for leak tightness test of pipelines

To determine whether any pressure variation in pipeline hydrostatic test is a result of temperature changes or the presence of leaks, the calculation of pressure/temperature changes is required for test sections. In these calculations, bulk modulus and volumetric expansion coefficient of fresh or sea water must be taken into account. In this study, a simple-to-use correlation is developed to predict the bulk modulus and volumetric expansion coefficient of both fresh and sea water as a function of temperature and pressure. The proposed correlation helps to cover the bulk modulus and volumetric expansion coefficient of both fresh and sea water for temperatures less than 50 °C (40 °C for sea water) as well as pressures up to 55,000 kPa (550 bar). The results can be used in follow-up calculations to determine whether any pressure variation in pipeline hydrostatic test is a result of temperature changes or the presence of leaks. The proposed correlation showed promising results with average absolute deviations for volumetric expansion coefficient and bulk modulus of water being around 0.58% and 0.08% respectively. The novel correlation is easy to use and will prove to be of immense value for project engineers to test the critical limits accurately.     

Solid-phase extraction for simultaneous separation and preconcentration of Fe(III) and Zn(II) traces using three chelatants and Ramelak bark-derived activated carbon as a new bio-sorbent

This article introduces a comparative study for the simultaneous separation and preconcentration of Fe(III) and Zn(II) traces in various water samples using three well-known ligands as chelating agents and activated carbon (AC) derived from Ramelak bark as a new bio-sorbent prior to the determination by ?ame atomic absorption spectrometry. The chelating agents were 4,4’-[(4-Cyano-phenyl)methylene]bis(3-methyl-1-phenyl-1H-pyrazol-5-ol) (CMBM), diethyldithiocarbamate (DDTC) and ammonium pyrrolidine dithiocarbamate (APDC). CMBM was synthesized by a procedure reported in the literature. The newly prepared AC was characterized by Scanning Electron Microscopy (SEM) and Fourier-Transform Infrared (FTIR) Spectrometry. The analytical parameters affecting the separation efficiency of the analytes including pH, shaking time, chelating agent volume (concentration), sorbent mass, sample ?ow rate and elution conditions were investigated and discussed. Common coexisting ions did not seriously interfere with the separation, showing the good selectivity of the proposed method. The calibration graph was linear in the range of 0.35–70, 0.50–80, 0.9–100, 0.55–75, 0.75–90 and 1.0–120 ng mL^?1 for Fe-CMBM, Fe-DDTC, Fe-APDC, Zn-CMBM, Zn-DDTC and Zn-APDC, respectively. Under optimized conditions, the limits of detection were 0.11, 0.13, 0.27, 0.16, 0.22 and 0.30 ng mL^?1 for Fe-CMBM, Fe-DDTC, Fe-APDC, Zn-CMBM, Zn-DDTC and Zn-APDC, respectively. The proposed method has been applied to the determination of Fe(III) and Zn(II) in different water samples with satisfactory recovery percentages. The developed method, validated with standard reference materials, was used successfully in determining the concentrations of metal ions in water samples.     

Combining continuous catalytic regenerative naphtha reformer with thermally coupled concept for improving the process yield

Advancements in the catalytic naphtha reforming process, as one of the main processes in petrochemical industry, contributed to development of continuous catalytic regenerative naphtha reformer units. Increasing the yield of aromatic and hydrogen as well as saving the energy in this process through the application of thermal coupling technique is a potentially interesting idea. This novel idea has been assessed in this paper. In the proposed configuration, continuous catalyst regeneration naphtha reforming process is coupled with hydrogenation of nitrobenzene in a two co-axial reactor separated by a solid wall, where the generated heat in nitrobenzene hydrogenation reaction transfers to naphtha reforming reaction medium through the surface of the tube. A steady-state, homogeneous, two-dimensional model is used to describe the performance of this configuration and a kinetic model including 32 pseudo-components with 84 reactions is considered for naphtha reforming reaction. After validating the model with the commercial data of a domestic plant, the obtained results of coupled reactor are compared by the conventional one. The obtained results show the superiority of CCR coupled reactor against the conventional one.